天地元一净化设备

k8凯发(中国)天生赢家·一触即发_首页4518

Nitrogen/Oxygen generators

YO oxygen generator

  • Product Details
  • Product Parameters
k8凯发(中国)天生赢家·一触即发

    Product features


    ☆ Compressed air is equipped with air purification and drying equipment. Clean air contributes to extending the molecular sieve's lifespan.

    ☆ Well-refined process design and the utilization of new types of molecular sieves.

    ☆ Using an advanced oxygen production process, continually optimizing equipment design to reduce energy consumption and capital investment.

    ☆ The equipment features a compact structural design, minimizing its footprint.

    ☆ Stable equipment performance, utilizing PLC control to achieve fully automated operation, resulting in a low annual failure rate.

    ☆ Oxygen production and purity can be adjusted within appropriate ranges.



    Working Principle


    The YO oxygen generator employs the "PSA" pressure swing adsorption principle, utilizing innovative technology to separate air. Purified and dried compressed air enters the bottom of the adsorption tower, where zeolite molecular sieves are filled. These sieves adsorb a majority of nitrogen. Through the action of pressure swing adsorption, oxygen and nitrogen are separated. Due to the selective adsorption characteristics of the molecular sieves, nitrogen is adsorbed within the zeolite molecular sieves, while oxygen becomes enriched in the gas phase, serving as the product output. The system incorporates two adsorption towers: one for oxygen production through adsorption, and the other for desorption and regeneration, operating in alternating cycles to achieve continuous production.

    k8凯发(中国)天生赢家·一触即发_首页2315


    Note:

    ☆ The data listed in this table are based on raw compressed air at 0.6 MPa (gauge pressure), 20 ° C ambient temperature, 0-meter elevation, and 80% relative humidity as the design reference.

    ☆ Installation site is indoors in a non-explosive zone,with an ambient temperature range of 3-45°C and good ventilation.

    ☆ The equipment requires a power supply of 220V/380V, 50Hz. Oxygen pressure should be higher than 0.3 MPa and can be pressurized to the desired user pressure.

    ☆If there are any changes to the data, the information provided later will prevail.

k8凯发(中国)天生赢家·一触即发

COPYRIGHT© Foshan tiandiyuanyi purification equipment co.,LTD Copyright 粤ICP备10221385 技术支持:思域科技