Product features
☆ If the user requires nitrogen purity greater than 99.99%, purification equipment should be configured based on the SCM nitrogen generation system. This series of products utilize carbon deoxidation catalysts, which do not require a hydrogen source. Carbon reacts with residual oxygen in the nitrogen gas to produce carbon dioxide. The pressure swing adsorption process is then used to remove carbon dioxide and water. After filtration, high-purity nitrogen gas is obtained. The technical indicators for high-purity nitrogen can reach O 2 ≤ 3 ppm, CO 2 ≤ 4 ppm, and dew point ≤ -60° C.
Note:
☆ The data in this table is based on an ambient temperature of 32° C, nitrogen inlet purity of 99.9%, and cooling water temperature of 25 ° C Carbon catalyst should be replenished every two to three months based on actual operating conditions.
☆ Standard nitrogen purity can be selected within the range of 99.7% to 99.9%. Different parameters such as catalyst consumption can be adjusted based on the nitrogen source's purity.
☆ If there are any changes to the data, the information provided later will prevail.
QR code of official account
Mobile Album QR Code
+86 0757 86418910
No.8, Shapu Road, Shapu Village,Xiaotang,Shishan town, Nanhai District, Foshan City,Guangdong Provice, P.R. China
COPYRIGHT© Foshan tiandiyuanyi purification equipment co.,LTD Copyright 粤ICP备10221385 技术支持：思域科技